Product
VIBER X3™
Product ID: VIBERr X3
Developed for vibration analysts, machine operators, and maintenance technicians. Easy to use, powerful for basic condition monitoring. Helps in maintaining machine reliability and verifying machinery repair. Store and trend condition data with Trend View.
Specifications:
|
Vibration transducer
|
Accelerometer
|
Standard 100 mV/g ± 10%
|
(Selectable sensitivity in the instrument)
|
|
Input amplitude range
|
Vibration
|
Max 50 g RMS
|
With other sensor up to 500 g
|
|
Bearing condition
|
Max 5 gBC
|
||
|
Dynamic range
|
80 dB (156,08 Hz with auto ranging)
|
|
|
|
Frequency range
|
Vibration
|
2 - 400 Hz
10 - 1000 Hz
6 - 1600 Hz
11 - 3200 Hz
|
User selectable
|
|
Bearing condition
|
0,5 to 16 kHz
|
|
|
|
Vibration units
|
g-value, m/s2, mm/s, in/s, µm, mils
|
User selectable
|
|
|
Amplitude presentation
|
RMS, Peak, Peak-Peak
|
User selectable
|
|
|
Analysis
|
Five highest peaks can be displayed
|
VMI Trend View Software included for PC
|
|
|
Frequency range of peak detec- tion
|
Frequency range
|
User selectable unit, between Hz and RPM
|
|
|
2 - 400 Hz
|
|||
|
6 - 1600 Hz
|
|||
|
11 - 2000 Hz
|
|||
|
10 - 1000 Hz
|
|||
|
Storage capacity
|
100 measurements can be stored
|
||
|
Three-point balancing
|
10 balancing results can be stored
|
||
|
Communication interface
|
USB 2.0
|
||
|
Sound frequency Filter enabled
|
60 Hz - 10 kHz
|
+26 dB to -4.1 dB
|
|
|
500 Hz - 10 kHz
|
+26 dB to -4.1 dB
|
||
|
Temperature sensor Range
|
Built-in infrared sensor
|
|
|
|
0 to 120 °C
|
|||
|
Accuracy
|
Vibration
|
± 3 %
|
Full scale is 50g for acceleration other units are frequency dependent
|
|
Bearing Condition
|
± 5%
|
Over 0.03 gBC.
|
|
|
Frequency/RPM
|
± 0.5 Hz/ ± 30 RPM
|
|
|
|
Temperature
|
± 1 °C
|
Emissivity factor must be set in accordance with the target surface.
|
|
|
Battery
|
Rechargeable Lithium
|
2300 mA/h, max 60 °C
|
Capacity of the batteries can vary depending on hardware revision. Max 2300 mAh. (Storage temp. -20 to max 60 °C)
|
|
Operating time
|
1 week normal use
|
Operating time depends on backlight, volume level and batteries used. Backlight adds 40mA and the sound volume up to 150mA. Charging time is approx: 6-12 hours.
|
|
|
External charger
|
5,0 V regulated @ 2000 mA
|
|
|
|
LCD display
|
B&W 64 x 120 pixels with background light
|
Operating temp. min 0 °C to max 50 °C, storage temp. max 72 °C
|
|
|
Enclosure protection
|
IP 65
|
|
|
|
Operating temp. range
|
0 to 50 °C
|
The restriction concerns display
|
|
|
Weight
|
415 gram
|
Instrument, including battery and transducer
|
|
|
Size (LxWxH)
|
165mm x 80mm x 50mm
|
|
|
|
OBS. If changing to another accelerometer, the sensitivity (mV/g) have to be changed. This is done in the menu under ”Transducer”.
|
|||
Features:
- PC software Trend View™ included
- Can be used as an Analyzer (fault displaying
highest peaks from the FFT) - Headphones for bearing noice detection
- Balancing with a new 3-point method
- Bearing Condition
- Built-in temperature sensor
- Selectable alarms
- Battery charger included
- Dust and waterproof, for rough use (IP 65)
Order Information:
- Minimum Order: 1ST
Contact Detail
| Contact: | Chia-Yuan Chuang |
| Address: | 36, Ln 196, Chueh-Ming Rd, Kaohsiung City , Taiwan (R.O.C.) |
| TEL: | +886-7-3966681 |
| FAX: | +886-7-3966612 |
| Email: |
info@leadfar.com.tw service@leadfar.com.tw |
| ZIP: | 807 |
http://www.morganschaffer.com/
http://www.chiang-pen.com.tw/
https://www.vmiab.com/ Address: 36, Ln 196, Chueh-Ming Rd, Kaohsiung City , Taiwan (R.O.C.)
TEL: +886-7-3966681 FAX: +886-7-3966612
Email:info@leadfar.com.tw service@leadfar.com.tw
http://www.chiang-pen.com.tw/
https://www.vmiab.com/ Address: 36, Ln 196, Chueh-Ming Rd, Kaohsiung City , Taiwan (R.O.C.)
TEL: +886-7-3966681 FAX: +886-7-3966612
Email:info@leadfar.com.tw service@leadfar.com.tw
Copyright © 2024 LeadFar Technologies CO., Ltd. All rights reserved. -Privacy Policy